Logo

What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?

14.06.2025 23:56

What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?

Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".

Edit 2024–10.

the problem then depends on "how fast does the fuse operate?".

All of the new features coming to Apple’s iOS apps - TechCrunch

At one ohm, the resistor has a maximum of 1 watt power.

The MOV will conduct when the voltage exceeds 50% of line voltage.

There are two important concepts here.

Why do I sometimes hear full conversations when I am alone?

At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.

Can the fuse protect the electronic devices from lightning instead of a surge protector.

If the nominal power is 4,000 watts then the current at 230volts is 16 amps.

What's the most sordid activity you've ever seen or heard about at a bachelorette party?

“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”

These devices are installed between the “hot” and “neutral” and protective ground.

what exactly is a ‘surge’ protector?

What are the most common signs that a partner will cheat before it happens?

So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.

One is “what exactly is in a ‘surge protector’ ? ”

A fuse is a non-resetable over current circuit protector.

Riddle: How do budget cuts, DEI hires, and empty reservoirs, turn the bluest, most Democrat city Red?

There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.

It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.

2024–10–00 [ Ammar Mahdi ] Ammar Mahdi

What are examples of real life forced feminization?

This is the picture of an electronic coil of wire wound around a core of magnetic material.

eight

What is lightning?

What kind of person makes you think "how come there are people like that"?

Barnstars:

He then describes the function of a fuse.

It seems Mohan does not understand the difference between a comment and an Answer.

What's the difference between “ce”, “ça”, and “cela”, and when do I use each (French)?

Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.

2024–10–10[John johnson John Johnson ]

This is where the MOV conducts again, and dissipated the energy.

Why is the First Amendment referred to as a right to free speech instead of an immunity from punishment for one's words, regardless of their truthfulness?

There are three different concepts here that are getting confused.

Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.

The other is “what does a “fuse” do?”

How common is it for siblings to fight over their parents' inheritance money? What is the best way to handle this type of situation?

2024–10–16 [ OO OLAOYE OYEBODE ]

But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).

In schematic diagrams this is the symbol for a fuse:

Do all rocket engines emit harmful gases into the atmosphere during launch?

This is 'the assistant's answer'

But it can get overloaded, and no longer works.

Because the load is inductive, the current lags the voltage.(by a bit).

Why does a college girl cover her face with a scarf in Bangalore?

This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.

Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.

2024–10–14 [Omar Gharbi Omar Gharbi ]

2024–10–11 [Victor Olarewsju Victor Olarewaju ]

The third is lightning and “how it gets conducted into a home.”

(Dc diagram shown, AC is similar).

P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.

2024–10–11 [Bobby Sanchez Bobby Sanchez ].

He then describes Rainy Season and Lightning.

This device then solves the entire problem.

Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.

The bolt then partially travels down the line to your home.

but this device (an Inductor) … impedes the rapid changes in the current.

An AC voltage/ current source, and an ac inductive load.

So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.

He then asserts :

“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”

Upvotes:

[old diagram got deleted by accident]

These are simplified answers to the original question, and does not change anything I wrote above.

I post the exact comment here.

Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.

This one hit behind the barn.

This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.

One

When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.

2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?

For this case there are devices called Metal oxide varistors (MOV).

A circuit breaker is similar, but is resettable.

So, the voltage could go up to 500 volts, and the fuse will not open up.

And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.

(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).

[image of Common-mode choke]

“ A fuse is a device which protects the (circuit) against overload and short circuit.”

but I think this circuit , shows a few more pieces.

a photo is worth a thousand words.

But… the neutral is now “floating” because of the 1 ohm resistance.

What does a fuse do?

First Sentence:

OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.

At least they know the answer if they wanted it.

nine

Now when you have a certain ac resistance, then a current flows in a loop.

This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.

It also is a device that limits the change in current flow.

This is where this question deviates from being a 'generic' question, and becomes more specific.

Here is a simplified AC power diagram.

so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.

so, what happens?